cakesneeze4

How to Fix a Composite Door Replacement Lock Many homes are fitted with composite doors for their attractive good looks as well as their improved security and insulation properties. The majority of issues with these doors are caused by malfunctioning mechanism, and can usually be fixed without the need to replace your composite door. The most frequent issue is a locked that is sticky that occurs when it becomes difficult to put it in or turn the key. You can solve this issue by lubricating your door lock's internal mechanisms. Warped Doors Composite doors are extremely durable, durable and long-lasting but this doesn't mean that they are immune to damage or issues. Warping and inability to open your doors properly are two of the most frequent problems with composite doors. Some of these issues are fixable, while others require more maintenance and work. The doors made of wood and composite are susceptible to warping, which happens when the material is bent and change shape over time because of exposure to different temperatures and moisture. This can cause the door to be stiff and difficult to open or close, and can affect how it functions as a lock. One of the best ways to stop warping is choosing a quality composite door with an outer coating or finish that protects it from UV rays. Another common composite door problem is stuck locks. This occurs when the lock mechanisms and handles become coated in dust, dirt or other debris, making it difficult to open, shut or lock the door. In the worst scenario, this could cause security issues as it is easy for unauthorized individuals to gain access to your property. This can be prevented by cleaning your composite doors using a the help of a damp rag, and then applying a silicone-based lubricant or graphite lubricant to them every six months. Water can enter your home if the drainage system within your composite door becomes blocked. This is usually a result of the weather seals being removed over time, which means that they aren't pressing firmly against the track. This issue can be avoided by ensuring that they are positioned correctly and then repositioning them in the correct position. Finally, the hinges on your doors made of composite may be weakened over time, leading them to get caught. This can be due to various reasons, including moisture changes, excessive heating and not closing the doors correctly. To remedy this, you can re-adjust the hinges using a hex key, Phillips-head screwdriver or flathead screwdriver. Applying a lithium-based grease to the hinges can also help prevent this. Faulty Locks Composite doors are extremely sturdy and incredibly durable. This doesn't mean they will never break or have problems. The issues, be it swelling or warping or even a key that won’t turn, could impact the security and performance of your door. Fortunately, most of these problems can be easily repaired using the right tools and experience. The problem with locks that are defective can affect uPVC and composite doors, though composite doors typically experience less of this problem than an uPVC door because of the nature of their construction. It may be necessary to replace the lock, or just adjust the locking mechanism, and then lubricate the keyhole. It's important to use graphite-based lubricants on the key and lock cylinder, as opposed to oil-based ones like WD-40 to avoid damage to these components. If you are having difficulty to open or close your composite door the locking points could have shifted out of alignment. Or the lock mechanism could be faulty. In this instance, it is important to contact a locksmith to make sure that the lock and door are in the correct position. The most common cause of an ineffective lock on a composite door is the swell of the material used to construct the doors. This is usually caused by an increase in humidity or damp conditions and can lead to locking mechanisms not working correctly. This could cause doors to become difficult to open and close, while placing your home security at risk. It is essential to develop the habit of throwing the handle when locking and closing your composite doors. This will trigger the various locking points along the door, and not only the latch at the middle which can leave your doors that are made of composite susceptible to warping and swelling. In addition to ensuring that the lock is activated and secure, this will ensure that the door is secured and increase its energy efficiency. Sticky Locks A lock that is stuck is a problem that can occur on any type of door. The good part is that this typical problem can be resolved quickly and easily by following the steps below. These tips will keep your composite replacement door lock in good shape. One of the main reasons that a lock will become sticky is because the internal components are wearing out. Over time, the metallic surfaces of the pins, springs and tumblers start to wear down, causing friction and the accumulation of dirt and grime. This gunk can make the key difficult to turn and could cause damage to the lock. Using a Teflon or PTFE based lubricant or powdered graphite can aid in preventing these issues. Dry lubricant from WD-40 is a very popular choice and is available at most DIY stores. Use the straw of the can to put a small quantity of lubricant into the lock mechanism. Slide your key into and out of the lock a few times to spread the lubricant across the lock. After applying the lubricant clean off any excess so that it does not attract dirt and other debris. Closing your composite door is a second important aspect. By pounding the door or applying too excessive pressure on the handle may wear out the lock mechanism faster, causing it to become stuck. Also, keeping the door open for extended periods can increase moisture levels in the home and result in mould or warping of the frame and door. While it's easy to take the locks on your composite door for granted, as long as they work properly it is vital to maintain them regularly in order to ensure they continue work correctly. These tips will ensure your new composite lock is in good working order and your home is safe. If you notice that your locks aren't operating as they should, it's recommended to call an expert locksmith for assistance and advice. They can inspect the lock to determine the most effective solution for you, whether it's repair or replacement. Key Doesn't Turn Composite doors have a chic modern appearance and offer increased security and insulation. They also offer a broad range of finishes and colours to complement your home's decor and personality. Although composite doors are strong they require regular maintenance to keep in good condition. The majority of minor issues with composite doors can be fixed relatively easily such as stuck doors or ones that are not aligned properly. In many cases, composite doors become difficult to open or lock because of a poor-fitting frame, expansion due to weather changes, or due to aging of the mechanism inside. In these cases the most frequent solutions involve adjusting the strike plate and hinges to ensure they sit comfortably within the frame and can be opened and locked quickly. www.repairmywindowsanddoors.co.uk could also be necessary to clean the inside of the locking the cylinder to eliminate any obstructions. If the key won't turn in the lock, the locking mechanism is likely be defective and requires replacement. This is an issue that requires expert Locksmith help. Christopher the Locksmith provides a fast, easy service that includes replacement locks of similar quality at reasonable prices. Keep the door's frame and hardware clean to avoid these issues. This means regularly cleaning them to remove dirt and grime. It also means applying lubricant to the hinges and lock mechanism. When you use a lubricant ensure that it is specifically designed for locks and doors to avoid causing further damage. A further preventive measure to make is to always put the handle up while closing a composite (also called throwing the doors). This will ensure that the locking points of the door are properly in place and reduce the risk of damage or warping. It is also recommended to replace your old composite doors with a highly-secure Kite Marked cylinder. This can greatly decrease the risk of your composite doors being broken into as they have anti-drill, anti-bump and anti-snap protection. Many insurance companies now require this as a part of your home insurance policy. If your composite doors have been damaged in an attempted break-in, it is recommended to get in touch with an Locksmith as soon as you can to repair or replace it to prevent further damage.